Air Line Filter / Pressure Regulator, 1/4"
This unit allows pressure regulation of the downstream air line, as well as particle & moisture filtration.
Helps extend the life of pneumatic equipment.
One of the biggest killers of pneumatic equipment is moisture (condensate) in the incoming air supply. This is why a water trap filter is required very close to the inlet of the connected pneumatic equipment.
It is rarely enough protection to have a single water trap filter at the compressor, as this will only remove some of the moisture, and the colder the air is when it is flowing through the filter, the more effective the moisture removal will be.
As the air is often warm when leaving the compressor, a lot of moisture gets through and then condenses in the air lines.
Therefore a filter such as this handy combination unit is usually required at the location of the pneumatic equipment.
Item Type: Pressure Regulator & Moisture Filter
Port Size: 1/4" BSPF
Application: Install near the pump or device air inlet to regulate air pressure & assist with removal of excess condensate